The service life of the rolling shutter door motor not only depends on the quality of the motor itself and the level of standardization in daily operation, but also on the maintenance after operation. How to properly maintain the motor of the rolling shutter door can be seen from the following aspects:
Firstly, regularly inspect the motor. Perform routine inspections on all components of the rolling shutter door motor, including the door rail, card assembly, buttons, etc., to check for any damage. If there is any, it needs to be replaced in a timely manner to prevent further damage to the motor.
Secondly, when using the roller shutter door motor, it is important to ensure that the surrounding environment is relatively dry. Keep the surface of the motor clean, and there should be no dust or fibers present at the outlet of the motor.
Once again, if there is continuous vibration during the use of the rolling shutter door motor, the motor should be stopped immediately and the fault should be eliminated before it can be put back into production. If the motor produces loud noise during operation, it indicates that Tina and the bearings have malfunctioned, and new bearings should be replaced in a timely manner to ensure the normal operation of the motor.
Finally, ensure the lubrication level of the motor at all times. After the motor has been running for a certain period of time, clean the existing lubricating oil and add lubricating oil again.
